centos 查看磁盘分区的文件系统类型

1. lsblk -f

这个命令是查看系统可以识别出的所有分区的文件系统类型

NAME            FSTYPE      LABEL UUID                                   MOUNTPOINT
sda                                                                  
├─sda1          xfs               d296d532-3b6f-4356-97d5-8eea439d3187   /boot
└─sda2          LVM2_member       CY71gX-G43e-taNL-1XFc-LyU1-939X-iqPF1t 
  ├─centos-root xfs               dac3b400-0af5-43c6-9bd9-a7867bfb3051   /
  ├─centos-swap swap              fc6c66c0-0790-4b9d-89b1-068410710219   [SWAP]
  └─centos-home xfs               f07d25d8-9813-4c4e-a520-c6988bba1e75   
nvme0n1                                                              
└─nvme0n1p1     ext3              93f8545f-8fef-4f33-ad13-419baba99a54   /home

2. blkid

查看已格式化分区的 UUID 和文件系统。使用 blkid 可以输出分区或分区的文件系统类型,查看 TYPE 字段输出。

/dev/mapper/centos-root: UUID="dac3b400-0af5-43c6-9bd9-a7867bfb3051" TYPE="xfs" 
/dev/sda2: UUID="CY71gX-G43e-taNL-1XFc-LyU1-939X-iqPF1t" TYPE="LVM2_member" 
/dev/nvme0n1p1: UUID="93f8545f-8fef-4f33-ad13-419baba99a54" TYPE="ext3" 
/dev/sda1: UUID="d296d532-3b6f-4356-97d5-8eea439d3187" TYPE="xfs" 
/dev/mapper/centos-swap: UUID="fc6c66c0-0790-4b9d-89b1-068410710219" TYPE="swap" 
/dev/mapper/centos-home: UUID="f07d25d8-9813-4c4e-a520-c6988bba1e75" TYPE="xfs" 
/dev/nvme0n1: PTTYPE="dos" 

3. parted -l

parted -l 命令会输出分区类型 ( msdos gpt ) 参数 l (list)表示列出所有设备的分区信息。

Model: Intel RMS25CB080 (scsi)
Disk /dev/sda: 249GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags: 

Number Start End Size Type File system 标志 1 1049kB 1075MB 1074MB primary xfs 启动 2 1075MB 249GB 248GB primary lvm

Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/centos-home: 190GB Sector size (logical/physical): 512B/512B Partition Table: loop Disk Flags:

Number Start End Size File system 标志 1 0.00B 190GB 190GB xfs

Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/centos-swap: 4295MB Sector size (logical/physical): 512B/512B Partition Table: loop Disk Flags:

Number Start End Size File system 标志 1 0.00B 4295MB 4295MB linux-swap(v1)

Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/centos-root: 53.7GB Sector size (logical/physical): 512B/512B Partition Table: loop Disk Flags:

Number Start End Size File system 标志 1 0.00B 53.7GB 53.7GB xfs

Model: NVMe Device (nvme) Disk /dev/nvme0n1: 1600GB Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags:

Number Start End Size Type File system 标志 1 1049kB 1600GB 1600GB primary ext3

4. df -T

只可以查看已经挂载的分区和文件系统类型

文件系统                类型          1K-块      已用      可用 已用% 挂载点
devtmpfs                devtmpfs  115411020         0 115411020    0% /dev
tmpfs                   tmpfs     115423048         0 115423048    0% /dev/shm
tmpfs                   tmpfs     115423048     19464 115403584    1% /run
tmpfs                   tmpfs     115423048         0 115423048    0% /sys/fs/cgroup
/dev/mapper/centos-root xfs        52403200   2526588  49876612    5% /
/dev/sda1               xfs         1038336    155008    883328   15% /boot
tmpfs                   tmpfs      23084612         0  23084612    0% /run/user/0
/dev/nvme0n1p1          ext3     1538158724 495456276 964561812   34% /home

我自己比较常用的是lsblk -f 好记,好用

债见

THE END